MALLA PASACABLES CON PASADOR ELECTRICO (31032)

Descripción Especificaciones Malla Pasacables CON Pasador Electrico (31032) Greenlee Select the type of grip needed. 2. 3. Select a grip with maximum rated capacity that meets or exceeds the cable puller’s maximum pulling force. 1. seleCt tHe tyPe oF griP NeeDeD. size raNge Max. rateD tyPe Dia. iNCHes CaPaCity – lBs. griP tyPe DesCriPtioN oF eye (mm) (kN) Use to PUll Junior Grips Single weave galvanized steel mesh Flexible .19-1.24 708 In conduit or tray – Building wire by hand. (4.8-31.5) (3.5) Light Duty Grips Single weave galvanized steel mesh Flexible .50-3.99 2940 In conduit or tray – Light-duty (12.7-101.3) (13.1) applications, short easy runs. T-Type Grips Double weave galvanized steel mesh Flexible .50-3.99 6200 In conduit or tray – Medium-duty (12.7-101.3) (27.6) applications K-Type Grips Double weave galvanized steel mesh Rotating forged .50-6.99 9600 In conduit or tray – Heavy-duty (12.7-177.5) (42.7) applications, long hard runs. Multiple Strength Triple to double to single weave Rotating forged .25-3.99 9600 overhead transmission lines – Bare or Grips galvanized steel mesh (6.4-101.3) (42.7) insulated conductors, wire rope. Slack Grips Double weave galvanized steel mesh Flexible .50-3.99 2400 Where end of conductor is not available. Rod Closing – rod closing – offset eye (12.7-101.3) (10.7) Can be pulled straight only, rod will not flex. After determining the type of grip needed, measure the diameter of the cable and refer to the chart on bottom of this page for required grip diameter range. being pulled. If pulling more than one cable “of the same diameter,” refer to once the cable diameter or required grip diameter is determined, refer to chart below for required grip diameter range. If pulling more than one cable individual chart for type of grip chosen to locate Catalog/UPC number. “of different diameters,” bundle cables together, measure the circumference CaBles WitH tHe saMe DiaMeter iN oNe griP* 2 CaBles 3 CaBles 4 CaBles 5 CaBles 6 & 7 CaBles 8 CaBles 9 CaBles reQUireD Dia. eaCH Dia. eaCH Dia. eaCH Dia. eaCH Dia. eaCH Dia. eaCH Dia. eaCH griP DiaMeter iN./(mm) iN./(mm) iN./(mm) iN./(mm) iN./(mm) iN./(mm) iN./(mm) iN./(mm) .30-.38/(7.6-9.7) .25-.31/(6.4-7.9) .22-.27/(5.6-6.9) .19-.24 /(4.8-6.1) .17-.22/(4.3-5.6) .15-.19/(3.8-6.1) .14-.18/(3.6-4.6) .50-.61/(12.7-15.5) .38-.44/(9.7-11.2) .31-.36/(7.9-9.1) .27-.31/(6.9-7.9) .24-.29/(6.1-7.4) .22-.26/(5.6-6.6) .19-.23/(6.1-5.8) .18-.21/(4.6-5.3) .62-.74/(15.7-18.8) .44-.59/(11.2-15.0) .36-.49/(9.1-12.4) .31-.42/(7.9-10.7) .29-.38/(7.4-9.7) .26-.34/(6.6-8.6) .23-.31/(5.8-7.9) .21-.28/(5.3-7.1) .75-.99/(19.1-25.1) .59-.75/(15.0-19.1) .49-.63/(12.4-16.0) .42-.54/(10.7-13.7) .38-.48/(9.7-12.2) .34-.43/(8.6-10.9) .31-.39/(7.9-9.9) .28-.35/(7.1-8.9) 1.00-1.24/(25.4-31.5) .75-.90/(19.1-22.9) .63-.76/(16.0-19.3) .54-.65/(13.7-16.5) .48-.58/(12.2-14.7) .43-.52/(10.9-13.2) .39-.46/(9.9-11.7) .35-.42/(8.9-10.7) 1.25-1.49/(31.8-37.8) .90-1.07/(22.9-27.2) .76-.89/(19.3-22.6) .65-.77/(16.5-19.6) .58-.67/(14.7-17.0) .52-.60/(13.2-15.2) .46-.54/(11.7-13.7) .42-.49/(10.7-12.4) 1.50-1.74/(38.1-44.2) 1.07-1.22/(27.2-31.0) .89-1.02/(22.6-25.9) .77-.88/(19.6-22.4) .67-.77/(17.0-19.6) .60-.69/(15.2-17.5) .54-.62/(13.7-15.7) .49-.56/(12.4-14.2) 1.75-1.99/(44.5-50.5) 1.22-1.53/(31.0-39.9) 1.02-1.28/(25.9-32.5) .88-1.10/(22.4-27.9) .77-.96/(19.6-24.2) .69-.86/(17.5-21.8) .62-.77/(15.7-19.6) .56-.71/(14.2-18.00) 2.00-2.49/(50.8-63.2) 1.53-1.83 / (38.9-46.5) 1.28-1.53/(32.5-38.9) 1.10-1.32/(27.9-33.5) .96-1.16/(24.2-29.5) .86-1.03/(21.8-26.2) .77-.93/(19.6-23.6) .71-.85/(18.0-21.6) 2.50-2.99/(63.5-75.9) 1.83-2.14/(46.5-54.4) 1.53-1.79/(38.9-45.5) 1.32-1.54/(33.5-39.1) 1.16-1.35/(29.5-34.3) 1.03-1.20/(26.2-30.5) .93-1.08/(23.6-27.4) .85-.99/(21.6-25.1) 3.00-3.49/(76.2-88.6) 2.14-2.44 / (54.4-62.0) 1.79-2.05/(45.5-52.0) 1.54-1.76/(39.1-44.7) 1.35-1.54/(34.3-39.1) 1.20-1.37/(30.5-34.8) 1.08-1.24/(27.4-31.5) .99-1.13/(25.1-28.7) 3.50-3.99/(88.9-101.3) 2.44-2.75/(62.0-69.9) 2.05-2.30/(52.0-58.4) 1.76-1.98/(44.7-50.3) 1.54-1.74/(39.1-44.2) 1.37-1.55/(34.8-39.4) 1.24-1.39/(31.5-35.3) 1.13-1.27/(28.7-32.3) 4.00-4.49/(101.6-114.0) 2.75-3.06/(69.9-77.7) 2.30-2.56/(58.4-65.0) 1.98-2.20/(50.3-55.9) 1.74-1.93/(44.2-49.0) 1.55-1.72/(39.4-43.7) 1.39-1.55/(35.3-39.4) 1.27-1.41/(32.3-35.8) 4.50-4.99/(114.3-126.7) * Split grips require the next larger size. MeasUre tHe CirCUMFereNCe oF tHe Wire BUNDle CirCUMFereNCe raNge reQUireD griP DiaMeter iNCH mm iNCH mm 1.57- 1.95 39.9- 49.5 .50- .61 12.7- 15.5 1.95- 2.36 49.5- 59.9 .62- .74 15.8- 18.8 2.36- 3.14 59.9- 79.8 .75- .99 19.1- 25.1 3.14- 3.93 79.8- 99.8 1.00-1.24 25.4- 31.5 3.93- 4.71 99.8-119.6 1.25-1.49 31.8- 37.8 4.71- 5.50 119.6-139.7 1.50-1.74 38.1- 44.2 5.50- 6.28 139.7-159.5 1.75-1.99 44.5- 50.5 6.28- 7.85 159.5-199.4 2.00-2.49 50.8- 63.2 7.85- 9.42 199.4-239.3 2.50-2.99 63.5- 75.9 9.42-11.00 239.3-279.4 3.00-3.49 76.2- 88.6 11.00-12.57 279.4-319.3 3.50-3.99 88.9-101.3 12.57-14.14 319.3-359.2 4.00-4.49 101.6-114.0 14.14-15.71 359.2-399.0 4.50-4.99 114.3-126.7 = new producT = Replacement paRt = accessoRy Note: Rope is a very critical link in the cable pulling system. See page 166 for proper pulling rope selection. Combina materiales de calidad, terminación reforzada y un diseño orientado a rendimiento y durabilidad. Características principales = new producT = Replacement paRt = accessoRy Note : Rope is a very critical link in the cable pulling system. See page 166 for proper pulling rope selection. Aplicaciones recomendadas Producto profesional Greenlee indicado para uso en talleres, industria y obras. Consulte la ficha técnica adjunta para especificaciones detalladas de uso y compatibilidad. Contenido del producto 1 Malla Pasacables CON Pasador Electrico (31032) Ficha técnica / Manual Garantía del fabricante Uso profesional Propiedad Especificación = new producT = Replacement paRt = accessoRy Note Rope is a very critical link in the cable pulling system. See page 166 for proper pulling rope selection.